Overview

The EGI VRF Adapter provides seamless integration between VRF HVAC systems and smart home or building management systems (BMS). Available in two versions—Tuya ZigBee or Modbus RTU (RS-485)—this adapter enables centralized control, automation, and monitoring of up to 32 indoor units (IDUs).

Versions

  • Tuya ZigBee Version:
    • Wireless ZigBee 3.0 communication
    • Compatible with Tuya Smart and Smart Life apps
    • Easily integrates with Home Assistant via Tuya integration
  • Modbus RTU Version:
    • RS-485 wired interface
    • Native Modbus RTU support
    • Integrates directly with BMS, KNX systems (via gateway), and Home Assistant Modbus integration

Applications

  • Residential smart homes
  • Commercial building management
  • Hospitality and healthcare facilities
  • Industrial environmental control

Integration & Compatibility

Home Assistant KNX Integration BSwitch (SwitcBee) Integration
Native integration via Modbus Compatible via standard Modbus RTU-to-KNX gateways. Direct RS-485 wired communication.

Can share the same power supply with CoolSwitch (12V DC).

Simple two-wire RS-485 connection (A to A, B to B).

Cloud integration via Tuya
Direct ZigBee integration (ZigBee2MQTT/ZHA) (under development)

Certifications & Compliance

Region Certificate Directives and compliances
European Union (EU) CE Mark

Radio Equipment Directive (RED, 2014/53/EU)

RF:

EN 300 328 (2.4 GHz)

EN 301 893 (5 GHz)

EMC:

EN 301 489-1

EN 301 489-17

Safety:

EN 62368-1

RF Exposure:

EN 62479 / EN 62311

RoHS Compliance Directive 2011/65/EU
WEEE Directive

 

 

2012/19/EU
USA (Optional, upon request) FCC Certification FCC Part 15C (2.4 GHz) and FCC Part 15E (5 GHz)
UL/ETL Safety Certification UL 62368-1 (optional)
California Proposition 65 Compliance (optional)
Israel Ministry of Communications (MoC) Full certification and explicit report formats compliant with MoC standards
IIS Approval compliant with Israeli standards

Technical Specifications

General
Operating Voltage 12-30 VDC (Typical 12VDC, 2W)
Communication Interfaces ZigBee 3.0 (Tuya Version)

RS-485 Modbus RTU (Modbus Version)

Installation DIN Rail mountable
Operating Temperature -10°C to 60°C
Storage Temperature -20°C to 70°C
Relative Humidity 10%-90% (Non-condensing)
RS-485 Communication (Modbus Version Only)
Baud Rate 9600 bps
Data Bits 8
Parity Even
Stop Bits 1
Slave ID 1
ZigBee Communication (Tuya Version Only)
Protocol ZigBee 3.0
Frequency 2.4 GHz
Range Typically 30-50 meters (indoor)
Gateway Compatibility Any standard Tuya ZigBee gateway
Inputs & Outputs
Modbus RTU A/B Terminals (RS-485)
VRF System Connection Terminals for VRF communication bus
Power Supply DC Input terminal (12-30VDC)
Physical Dimensions
Dimensions (WxHxD) 106mm x 90mm x 58mm
Weight Approx. 220 grams
Mounting Standard DIN Rail (35mm)
IP Rating IP20 (For Indoor use only)

Supported VRF Brands


Brand
Adapter Port VRF Port Polarity Required Connection on ODU Centralized Control Address
Daikin (Multiple ODUs) F1, F2 F1, F2 (external-external) No Yes Yes
Daikin (Single ODU) F1, F2 F1, F2 (internal-external) No No Yes
Mitsubishi (Multiple ODUs) F1, F2 M1, M2 (TB7) No Yes No
Mitsubishi (Single ODU) F1, F2 M1, M2 (TB3) No No No
Mitsubishi (Rhombus) F1, F2 M1, M2 (external/Split box) No No No
Hitachi F1, F2 1, 2 No No No
Toshiba F1, F2 U1, U2 No No Yes
Panasonic F1, F2 U1, U2 No No No
Hisense F1, F2 1, 2 No No No
Haier F1, F2 P, Q No No No
York Qingdao F1, F2 1, 2 No No No
York Guangzhou X, Y A2, B2 Yes Yes No
GREE H, L G1, G2 Yes Yes No
TCL H, L F1, F2 Yes No No
Mitsubishi Heavy Industries X, Y A1, B1 or A2, B2 No No No
Midea, Bosch, Carrier X, Y X, Y or P, Q Yes Yes No
AUX X, Y A, B Yes No No
Samsung X, Y F1, F2 No No No
LG X, Y A, B (CEN) Yes No No
Macwell X, Y Apc, Bpc Yes Yes No
TICA X, Y A3, B3 Yes No No
Chigo X, Y P, Q Yes No No
Trane X, Y A, B Yes Yes No